Entering The Sealing Speed - Pfaff 8390 Instruction Manual

Preparation
9

Entering the sealing speed

.03.02
● Increase or reduce the value for the sealing speed directly.
or
● Call up the fi gure panel to enter the sealing speed.
● If necessary call up the fi gure panel to enter the speed difference between the top and
● Enter the value for the speed difference within the permitted range.
__
● If necessary call up the fi gure panel to enter the speed difference between the carriage
● Enter the value for the sealing speed within the permissible range.
__
● Further sealing parameters
34
Example PFAFF 8390-010
bottom feed roller.
The speed difference results from the change in speed of the top feed roller, which ro-
tates either more quickly or more slowly than the bottom feed roller. The value for the
speed difference depends on the material and application.
and feed rollers.
The speed difference depends on the change in speed of the carriage,
that runs either faster or slower than the feed rollers.
The value for the speed difference depends on the material and application.
(see also Chapter 10.03.05)