Installation and commissioning
8
Mounting the upper V-belt guard / Fitting the machine cover
.01.02
8
Fitting the reel stand
.01.03
20
9
2
7
Fig. 8 - 02
Fig. 8 -03
● Slide the left and right halves of the V-belt
● Screw screw 3 with distance bush 4 into
1
● Align the V-belt guard, taking care that
8
● Tighten screws 1 and 2 (through holes 8
● When using an external motor, the motor
6
5
4
3
● Fit the reel stand as shown in Fig. 8 - 03.
● Afterwards insert the stand in the hole in
guard into place with the slots behind the
heads of screws 1 and 2.
threaded hole 5.
clip 6 is behind slot 7 and in front of di-
stance bush 4.
and 9) and screw 3.
cover must also be fi tted as described by
the motor manufacturer.
the table top and secure it with the nuts
provided.