Connecting 12-Volt Trigger Output To External Theater Equipment; Connecting To Ac Power - Runco Reflection CL-610 CineWide Owner's Operating Manual

Installation
Connecting 12-volt
Trigger Output to External
Theater Equipment

Connecting to AC Power

If your home theater contains a retractable screen, screen mask or other 12-volt
trigger-activated equipment, use the cable supplied with the CL-610 to connect it to the
12-volt trigger output as shown in Figure 3-9.
to other,
12-volt
trigger-activated equipment
(screen, screen mask etc.)
Figure 3-9. Connecting the 12-Volt Trigger Output to Other Equipment
The CL-610 ships with various
types of AC power cords. Choose
the one that is appropriate to your
locale.
Plug the female end of the power
cord into the AC receptacle on the
rear of the projector (AC 100V ~
240V). Then, connect the other end
to your AC power source.
Black = Ground (Sleeve)
Red = +12V (Tip)
24 Runco CL-610 Series Owner's Operating Manual
S-VID / S-VID
3.5-mm
mini plug
Power
switch