Connecting 12-Volt Trigger Output To External Theater Equipment; Connecting 12-Volt Trigger Outputs - Runco Q-750i Installation And Operation Manual

Installation
Connecting 12-Volt
Trigger Output to External
Theater Equipment
➤
If your Q-750i is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the projector; see Figure 3-15.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger output.
AutoScope Lens Motor
Power
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-15. Connecting 12-Volt Trigger Outputs
AC Input
Sleeve = Ground
Tip = +12V
32 Q-750i Series Installation/Operation Manual