Other Considerations; Mounting The Cl-610; Floor Mounting (Upright); Ceiling Mounting (Inverted) - Runco Reflection CL-610 CineWide Owner's Operating Manual

Installation

Other Considerations

3.4

Mounting the CL-610

Floor Mounting (Upright)

Ceiling Mounting
(Inverted)
Adjusting the Projector
Height or Projection Angle
Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
• Keep the projector away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
In typical front and rear screen installations, the projector can be placed upright on a
secure and level surface such as a table or cart. Carts are useful when moving a projector
during a presentation or from site to site. If possible, lock the wheels when it's in position
to prevent it from being moved during a presentation.
For fixed installations, and for those that want the projector out of sight or have a limited
space for projector and audience, you can invert the CL-610 and suspend it from the
ceiling using a specially-designed ceiling mount fixture.
Use only the Runco-approved ceiling mount kit designed for your
Caution
projector. Install the mount kit according to the instructions
provided with it.
The projector can also be inverted and placed in an enclosure above and behind the
viewing area. Install four feet on the inside bottom surface of the enclosure on which the
projector can rest. A variety of materials can be used for this purpose (for example, rubber
crutch tips or turntable feet).
If the screen is significantly higher or lower than the projector, you can also tilt the
projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling
mount.
For a floor installation, turn the four adjustable
feet on the bottom of the projector to adjust
the projector height and/or projection angle.
If you do this, you may need to make
keystone adjustments or vertically shift the
image using the on-screen display (OSD)
controls, to compensate. For detailed
instructions, refer to Using the On-Screen
Menus on page 30.
18 Runco CL-610 Series Owner's Operating Manual