Rs-232 Controller Connection - Runco Reflection CL-610 CineWide Owner's Operating Manual

Connect a PC or home theater control/automation system (if present) to the RS-232 port
on the CL-610; see Figure 3-8. Use a standard, 4-wire RJ-11 telephone cable, wired
straight-through.
For more information about using this connection, refer to Serial Communications on
page 53.
RJ-11 Male
1
2
Black
3
4
Red
RS-232 Adapter Wiring
D-Sub 9-pin female
2
3
5
1, 4, 6, 7, 8, 9
Figure 3-8. RS-232 Control System Connection
Runco CL-610 Series Owner's Operating Manual
D-Sub 9-pin Adapter
Yellow
Yellow
Green
Black
Red
4-pin RJ-11
2
3
1, 4
--
RJ-11 to
(not included)
Green
5
D-Sub 9-pin female
Function
Transmit Data
Receive Data
Ground
Not Connected
23
RS-232 Controller
Connection
4 3 2 1
9 8 7 6
Installation