Configuring with Web Based Management
4.8 "Security" menu
6. In "Virtual IP Mode", specify how the IP address of the VPN gateway is obtained.
7. Click the "Set Values" button.
4.8.4.3
Connections
On the WBM page, you configure the basic settings for the VPN connection. With these
settings, the device can establish a non-secure VPN tunnel to the partner. You specify the
security settings on the WBM page "Authentication".
Note
If you use "1-to-1 NAT Local Subnet",
• only auto firewall rules are supported
• for "Operation", the setting "on demand" cannot be selected
Description
The page contains the following boxes:
● "Connection" input box
Enter a name for the VPN connection and click "Create" to create a new connection.
This table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Name
Shows the name of the VPN connection.
162
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02