Configuration - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.5 "Interfaces" menu
● Link
Shows the connection status to the network. With the connection status, the following is
possible:
– Up
– Down
● Mode
Shows the transfer parameters of the port.
● MTU (Maximum Transmission Unit)
Shows the packet size.
● Negotiation
Shows whether the automatic configuration is enabled or disabled.
● MAC Address
Shows the MAC address of the port.
4.5.1.2

Configuration

Configuring ports
With this page, you can configure all the ports of the device.
124
The port has a valid link to the network, a link integrity signal is being received.
The link is down, for example because the connected device is turned off.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02