Table of Contents
Advertisement
Preparing the Machine for Use
STEP 3: Deciding on an Installation Site
Placement and Installation
The weight of the machine alone is 67 kg (148 lbs.) Perform unloading and emplacement with care.
WARNING
CAUTION
Installation Environment
WARNING
WARNING
WARNING
WARNING
WARNING
Never install in a location subject to wide fluctuations in temperature or humidity.
Never install in a location subject to shaking or vibration.
Never install in a dusty or dirty location.
Never install in a location exposed to direct sunlight or near air-conditioning or heating equipment.
Never install in a location exposed to considerable electrical or magnetic noise, or other forms of electromagnetic energy.
Never install in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing so
may cause poor switch contact or ionizer damage.
26
Unloading and placement are operations that must be performed by 4
persons or more.
Tasks that require undue effort when performed by a small number of persons
may result in physical injury. Also, if dropped, such items may cause injury.
When lifting the machine, hold the locations shown in the figure.
Install the machine in a location that is level, stable, and able to bear the
weight of the machine after checking the weight of the machine in the
operation manual on the installation of the machine.
The total weight of the machine may reach 70 kg (155 lb.) or more.
Installation in an unsuitable location may cause a major accident, including tip
over, fall, or collapse.
Never install in a location exposed to open flame.
Milling waste may ignite. Powdered material is extremely flammable, and even
metal material may catch fire.
Never install close to any flammable object or in a gas-filled location.
Combustion or explosion may occur.
Never install out of doors or in any location where exposure to water or
high humidity may occur.
Doing so may result in fire or electrical shock.
Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emer-
gency. Install the machine next to an electrical outlet. Also, provide enough
empty space to allow immediate access to the electrical outlet.
When picking up the
machine, do not lift
from the dust collection
hose adapter.
Advertisement
Table of Contents
