Roland DWX-51D Setup Manual page 12

Hide thumbs Also See for DWX-51D:
Table of Contents

Advertisement

To Ensure Safe Use
Danger of components flying off or becoming damaged
WARNING
Keep the supply of compressed air within
the specified pressure range.
Exceeding the specified pressure may result
in a rupture or other major accident.
Never strike or subject the object to impacts.
Components may become damaged or rup-
ture under the pressure of compressed air.
When the machine will be out of use for
a prolonged period, stop supply of com-
pressed air and bleed off the air pressure.
This can prevent an accident.
Never damage the air hose, or bend or
twist it with undue force. Never use any
deteriorated article.
A damaged air hose may rupture.
Important notes about the end (cut edge) of the air hose
Failure to observe these cautions may result in air leakage or easy dislodgement of the air hose.
Also, after removing a hose, cut off the end before reattaching it.
10
Ensure that the
hose is not crushed.
WARNING
Before removing or attaching the regulator
and before performing maintenance, make
sure that the bowl is securely attached.
If the bowl is not properly attached, it may come
flying off when compressed air is supplied.
Clean the regulator bowl using a neutral
detergent. Never use solvents such as
gasoline, alcohol, or thinner.
Using solvents may degrade the bowl and
may result in a rupture.
Make the cut edge
straight.
Bowl
Keep free of damage
and soiling.

Advertisement

Table of Contents
loading

Table of Contents