Step 2: Preparing Separate Items - Roland DWX-51D Setup Manual

Preparing the Machine for Use

STEP 2: Preparing Separate Items

Dust Collector
This machine requires a dust collector for sucking up cutting waste generated from milling.
Milling cannot be performed without a dust collector.
WARNING
WARNING
The dust collector must meet the following conditions.
 Static pressure: 4 kPa or more
 Air flow: 2 m
 Dust collector hose: Use the included hose.
Unit: mm
24
Be sure to turn on the dust collector.
Milling waste and workpieces are flammable and toxic.
Never use a vacuum cleaner to clean up cutting waste.
Picking up fine cuttings using an ordinary vacuum cleaner may result in a fire
or explosion.
/min or more
3