Changing Barcode Options - Brady BradyPrinter S3100 User Manual

Changing Barcode Options

Barcode Size, Ratio, and Density
Human-Readable Text Options
BradyPrinter S3100 Sign & Label Printer User's Manual
Barcode options include setting a different ratio and density and increasing or
decreasing the barcode size.
To change the barcode size, ratio, or density:
1. In the Editor, select a barcode object.
2. In the Control Panel, edit the desired settings.
• Size: Touch
Changes are immediately reflected in the Editor.
• Ratio: Ratio is the thickness between a narrow bar and a wide bar (overall
width of the barcode). Does not apply to all symbologies. Choose from one
of the three options . Changes are immediately reflected in the Editor.
• Density: Density controls the width of the barcode lines and spaces.
Typically, the thinner the bar and spaces, the higher the bar code density
and the less space it takes on a label.
Touch the Density button, and then, in the Density dialog box, choose a
density for your barcode. Touch the OK button. The changes are immediately
reflected in the Editor.
Barcode text options let you choose whether to show any human-readable text on
your barcode and where it should be positioned (above or below the barcode).
You can also decide whether you want the text to include a check character or a
start/stop character.
To add human-readable text:
1. In the Editor, select a barcode object.
2. Touch the More Options button
Text control panel.
to increase or to decrease the barcode vertically.
to go to the Human Readable
Working with Barcodes
Changing Barcode Options
55