System Power; Starting Printer From A Non-Powered (Cold) State; Waking The Printer From Sleep Mode - Brady BradyPrinter S3100 User Manual

System Power

Starting Printer from a Non-powered (Cold) State

Waking the Printer from Sleep Mode

BradyPrinter S3100 Sign & Label Printer User's Manual
This procedure describes the power-up sequence when starting from a non-
powered state (i.e., printer has been unplugged). The printer does not retain label
data in the editor during a power interruption.
To start the printer from a cold state:
1. Plug the printer into a power source.
2. Turn the power switch on. The system automatically recognizes the supply
information for the installed media and ribbon and opens to the Home Page.
3. On the Home page, continue with your label activities.
If you do not touch the screen or press any keyboard or other keys/buttons for a
defined period of time, the system turns off the display and goes into a low-power
consumption mode (see "Set Clock" on page 20 for details). The current label and
settings are retained.
To wake the printer from sleep mode:
1. Press or touch the screen. The Editor displays the label or menu you
were on when the printer went to sleep.
2. Continue with your label activities.
Note: If a label is defined when the system goes into sleep mode and the
media is changed to a supply where the label no longer fits, you will be
prompted to make the data fit or save the existing label before continuing. If
you choose the option to make the data fit, the system will move and/or resize
the objects so they fit on the new media size.
System Power
Waking the Printer from Sleep Mode
13