Brady BradyPrinter S3100 User Manual page 78

Set Object Size
BradyPrinter S3100 Sign & Label Printer User's Manual
3. Touch a handle and drag on the touch screen to resize the object:
• Proportionally: Drag the corner handle to resize the object proportionally.
• Non-Proportionally (Width): Drag the right-side handle to stretch or shrink
the object width in the direction of the handle only.
• Non-Proportionally (Height): Drag the bottom handle to stretch or shrink
the object width in the direction of the handle only.
4. To hide the sizing handles, touch the Size button
Use this procedure if you want to size an object by setting the object height and
width.
To size an object using object dimensions:
1. In the Editor, select the object you want to resize.
2. In the Control Panel, touch the More Options button
the Exact Size & Position option.
3. Touch the Exact Size & Position button.
4. To maintain the object proportions, select the Keep width-height ratio check
box.
5. Type a value for:
• Object width
• Object height
6. When done, touch the OK button
specified size.
Note: If the values entered result in the object being positioned outside the
printable area, the system resizes and repositions the object to fit on the label.
Handling Objects
again.
. The object is displayed at the
Sizing Objects
to navigate to
61