Head Close; Media Power Up - Brady Bradyprinter THT 200M-e User Manual

Selecting ZPL Mode
Press Display Shows
ZPL MODE
Power-Up and Head Close Parameters

MEDIA POWER UP

HEAD CLOSE

56
All manuals and user guides at all-guides.com
Selecting ZPL Mode: Press the (+) or (–) key to display other
choices.
Default: ZPL II
Selections: ZPL II, ZPL
The printer remains in the selected mode until it is changed by
this front panel instruction or by using a ZPL/ZPL II command.
The printer accepts label formats written in either ZPL or ZPL II.
This eliminates the need to rewrite any ZPL formats you already
have. For more details, contact Technical Support.
Media Power-Up: Press the (+) or (–) key to display other
choices.
Default: Calibration
Selections: Feed, calibration, length, and no motion
This parameter establishes the action of the media when the
printer is turned on.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.
Head Close: Press the (+) or (–) key to display other choices.
Default: Calibration
Selections: Feed, calibration, length, no motion
Determines the action of the media after the printhead has been
opened and then closed.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.
Bradyprinter 200M-e and 200M-e 300 User's Guide
Action/Explanation