System Power; Starting Printer From A Non-Powered (Cold) State; Waking The Printer From Sleep Mode - Brady BBP31 User Manual

System Power

Starting Printer from a Non-powered (Cold) State

Waking the Printer from Sleep Mode

BBP™31 Sign & Label Printer User Guide
This procedure describes the power-up sequence when starting from a non-
powered state (i.e., printer has been unplugged). The printer does not retain the
label during a power interruption.
Note: With power removed (i.e., printer disconnected from power source), the
system clock retains its settings for about 30 days.
To start the printer from a cold state:
1. Plug the printer into a power source. The system automatically recognizes the
supply information for the installed media and ribbon and opens to the
Home Page.
2. On the Home page, continue with your label activities.
If you do not touch the screen or press any keyboard or other keys/buttons for a
defined period of time, the system turns off the display and goes into a low-power
consumption mode (see "Set Clock" on page 2-15 for details). The current label
and settings are retained.
To wake the printer from sleep mode:
1. Press or touch the screen. The Editor displays the label or menu you
were on when the printer went to sleep.
2. Continue with your label activities.
Note: If a label is defined when the system goes into sleep mode and the
media is changed to a supply where the label no longer fits, you will be
prompted to make the data fit or save the existing label before continuing. If
you choose the option to make the data fit, the system will move and/or resize
the objects so they fit on the new media size.
System Power
Waking the Printer from Sleep Mode
-
2 9