Omron V680S-HMD63-PNT User Manual page 191

RF Tag Communications View
Select this check box to
repeatedly send the command.
1. Command Area
Item name
Reading Read data address
RF Tag
Read data size
Writing Write data address
RF Tag
Data to write
Repeat
2. Response Area
Item name
Error code/Diagnostics results
Number of communications
Read data
Clear
Refer to RFID System Maintenance in Section 6 Functions for details on communications diagnostics.
p.104
If RF Tag communications are attempted when the Reader/Writer is performing RF Tag communications, noise
measurement, or other processing, an error will occur. Perform operations when the Reader/Writer is not busy with
another operation.
Click this button to send
the command.
Description
Specify in 4-digit hexadecimal the first address to read from the
RF Tag.
Specify in 4-digit hexadecimal the number of words of data to read
from the RF Tag.
Specify in 4-digit hexadecimal the first address to write in the RF
Tag.
Specify the data to write to RF Tag.
Select this check box to repeatedly and consecutively send the
command. Clear the selection of this check box if the RF Tag
communications option of the Reader/Writer is set to Repeat or
FIFO Repeat. If a command is sent repeatedly and consecutively
with the Repeat or FIFO Repeat option, an execution status error
will occur.
The background will be green when the response returned by the Reader/Writer
indicates a normal end.
If the response indicates an error end, the background will be red and the error code will
be displayed.
If communications diagnostics are enabled and communications with the RF Tag are
determined to be unstable, the background will be yellow and the diagnostics result is
displayed.
The total number of commands that have been sent to the Reader/Writer is displayed.
The data that was read in communications with the RF Tag is displayed.
This button clears the number of sent commands and read data.
Browser Interface
1
2
0000 to 0999 hex
0001 to 007D hex
0000 to 0999 hex
1 to 113 words
Description
Section 8
Setting range
RFID System
189
User's Manual
(PROFINET)