Omron V680S-HMD63-PNT User Manual page 135

5.
Display the Multi-Reader/Writer Settings View.
6.
Select the High-speed travelling mode Check Box.
7.
Set the IP addresses of the three slave Reader/Writers and click the Set Button.
If you assign the IP addresses of the Reader/Writer from the IO controller, the IP addresses of the slave Reader/Writer
will change dynamically and may result in unexpected operation. Confirm that no problems will occur before you assign
the IP addresses from the IO controller.
Section 6
Functions
RFID System
133
User's Manual
(PROFINET)