Omron V680S-HMD63-PNT User Manual page 189

Communications Settings View
Item name
RF Tag Communications
option
RF Tag Communications
Speed
Write Verify
Use diagnostics
Refer to Communications Options in Section 6 Functions for information of RF Tag Communications option.
p.89
Refer to Setting Communications Conditions in Section 6 Functions for information of RF Tag Communications option.
p.99
The settings are immediately reflected when you click the " Set" button.
When the Reader/Writer is running in safe mode, this screen can not be operated. Run the Reader/Writer in RUN
mode.
Refer to RFID System Maintenance in Section 6 Functions f for communication diagnostic.
p.104
The error message is displayed if you change the configuration during the Reader/Writer is executing RF tag
communication or Noise measurement.
Click this button to set
the displayed values.
Description
Select the RF Tag communications
option.
Specify the speed of communications
with the RF Tags.
Select this check box to enable write
verification.
Select to enabled or disabled.
Browser Interface
Setting range
Once, Auto, Repeat, FIFO
Repeat (Without ID code
check) or FIFO Repeat (With
ID code check)
High speed or Normal speed
Enabled/disabled
Enabled/disabled
Section 8
Default
Once
High speed
Enabled
Enabled
RFID System
187
User's Manual
(PROFINET)