Customizing The Home Screen; Touchscreen Icons - Johnson Controls TEC3330 Series Installation Instructions Manual

Customizing the Home Screen

Customizing the Home screen settings include:
• Brightness
• Enable Backlight
You can also show or hide these items on the Home screen:
• Fan Button
• Space Temperature •
• Humidity
To customize the Home screen:
1. Press the Menu icon.
2. Press Display Settings.
3. Enable or disable elements of the home screen as appropriate for the building owner and occupants.
4. Set the passcode on the thermostat controller to prevent the occupants from changing settings that they should
not have access to change.

Touchscreen Icons

Table 3 describes the home screen touchable icons. Press and release a touchscreen icon to activate the TEC.
Additional touchable icons appear based on the menu, and those icons are also described in Table 3.
Table 3: Touchscreen Icons (Part 1 of 2)
Icon Icon Name
Menu
Alarm
Unit Power
On
Off
Network Communication
Arrow
Run/Hold
TEC3000 Series Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
• Units
• Time
• Off Button
Hold Button
• Setpoint
Description
Displays the configuration screens where various settings may be adjusted.
Indicates that the thermostat controller has triggered an alarm.
Powers the thermostat controller on or off.
Note: This icon disables all equipment control, but does not physically
power down the unit.
Indicates that the thermostat controller detected a supervisory controller and
both are online.
Increases or decreases a value depending on the configuration screen.
Displays the current setpoint. Hold mode is enabled by pressing the button.
• Time Zone
• Time Format
• Alarm Indication
• Occupancy Status
• Unit Status
11
• Date
• Date Format
• Date/Time