Customizing The Home Screen; Touchscreen Icons - Johnson Controls TEC3000 Series Quick Start Manual

Figure 18: Thermostat controller home screen (shown
with light and dark themes)
To switch between the modern, classic, light, and
dark themes, complete the following steps:
1. Press the Menu icon.
2. Press Settings.
3. Press Display Settings.
4. Press Change Color Theme.
5. Select one of the four options available.
Result
Multiple pages are available on the display. The page that
you currently view is emphasized with a filled dot. The
other available page display as an empty dot.
In the modern theme, the cooling, or blue, and heating, or
orange, circles show whether the cooling or heating mode
is active.
Figure 19: Thermostat controller home screen in
cooling mode (left) and heating mode (right)

Customizing the home screen

About this task:
Customizing the Home screen settings include:
• Brightness
• Enable Backlight
• Units
• Time
• Time Zone
• Time Format
• Date
• Date Format
You can also show or hide these items on the Home
screen:
• Fan Button
• Temperature
• Humidity
• Off Button
• Hold Button
• Setpoint
• Alarms
• Occupancy Status
• Unit Status
• Date/Time
10 TEC3000 Series On/Off or Floating Fan Coil Thermostats Quick Start Guide
To customize the Home screen, complete the following
steps:
1. Press the Menu icon.
2. Press Display Settings.
3. Enable or disable elements of the home screen as
appropriate for the building owner and occupants.
4. Set the passcode on the thermostat controller to
prevent the occupants from changing settings that
they should not have access to change.

Touchscreen icons

Table 4 describes the touchscreen icons on the home
screen. Press and release a touchscreen icon to activate
the TEC. Additional touchscreen icons appear based on
the menu, and those icons are also described in Table 4.
Table 4: Touchscreen icons
Icon and icon name
Menu
Alarm
Unit Power
On
Standby
Humidity
On
Standby
Degree
On
Standby
Description
Displays the configuration
screens where various settings
may be adjusted.
Indicates that the thermostat
controller has triggered an
alarm.
Powers the thermostat controller
on or off.
Notes:
• This icon disables all
equipment control but does
not physically power down the
unit.
• On the modern home
screen, if the Unit Power
icon is in standby mode, the
temperature and humidity
also display in standby mode
to indicate that control off or
standby mode is active.
Indicates the humidity reading.
Indicates that the unit is set to
degrees.