General Configuration Parameters; Table 5 - General Configuration Parameters - Honeywell ST 800 Series User Manual

General Configuration Parameters

Select the General button on the DEVICE MAIN MENU page, and configure parameters
Table 5.
Read (R) or
Parameter
Read/Write (R/W)
PV Type
Communication
Mode
FS Direction
Select the Back button to go back to the DE MAIN MENU.
Revision 5.0
according to
Table 5 – General Configuration Parameters
Configuration Details
Dual Range Smart Transmitter Digital Communications
R/W
(STDC) or Single Range or Single Range with
secondary variable (SV).
R/W
Analog, DE 4-byte, or DE 6-byte
Failsafe (FS) direction: upscale or downscale, switch
R selectable on the electronics module. See the ST 800
SmartLine Transmitter User Manual for details.
ST 800 Series HART/DE Option User's Manual Page 15