Basic Setup Page; Pressure Transfer Fn; Low Flow Cutoff Mode; Device Information - Honeywell ST 800 Series User Manual

10.6 Basic Setup Page

Pressure Transfer Fn:

Allows selecting Transfer function; Linear or Square Root.

Low Flow Cutoff Mode:

Allows selecting the User Config Mode and entering the Low Flow Cutoff breakpoint from 0-25% to
get the needed signal conditioning. Refer to Table 11 for more details

Device Information

Allows access to both read only parameters and read/write parameters.
Provides access to Message, Clear Message and Maint Mode.
Page 100 ST 800 Series HART/DE Option User's Manual
"Transmitter Messaging" and
"Maintenance Mode"
Revision 5.0