Procedure for upgrading the software from Device Integral display
•
Power up the device and retrieve the device Serial Number by navigating to Information-
>Options menu using reedswitch buttons.
•
Reference document PILD Upgrade Option, ST 800 Instruction Sheet (34-ST-33-73) for
firmware revision level requirements.
•
Verify firmware revisions in device meet the following required minimum revision levels for
PILD Option Licensing support:
•
Basic Display: 1.08
•
Advanced Display (Euro): 1.12
•
Advanced Display (Asia): 1.13
•
HART Comm Firmware: 1.10
•
Fieldbus Comm. Firmware: 1.04
•
Sensor Firmware: 1.03
Please reference your User Manual on how to obtain firmware revision numbers from a
device. If you need technical support contact Honeywell GTS at 1-800-423-9883.
•
Place an order for the ST800 PILD Field Upgrade kit, part number 50097038-501. Include
the following information with the order:
-
Serial number of the device
-
Feature requires license: PILD Field upgrade for St 800 (Part Number - 50097038-
501)
•
The Honeywell factory generates and sends a License Key to customer.
•
Customer activates the license by writing 'License Key' parameter provided
-
Navigate to Information->Options menu and select License Key parameter.
Press ↵ to begin the edit process.
-
Press the ↑ or ↓ buttons to select the desired digit, and then press ↵ to advance to the
-
next digit to the right.
After the last digit has been entered, press ↵ one more time to write the new value to
-
ST800 Transmitter.
•
On confirmation of the license activation, PILD parameter will be present in Information-
>Options menu indicates the enabled status.
Page 96
ST 800 Series HART/DE Option User's Manual
Revision 5.0