Power Up Diagnostics; Pild Status; Table 26 - Power Up Diagnostics - Honeywell ST 800 Series User Manual

Power Up Diagnostics

Pwr fail Parameter
counter
Time since Method
last power fail

PILD Status

Name
PILD Functionality
Status
PILD factor
Current Mode
Page 84
Table 26 – Power Up Diagnostics
Description
Set-up
NVM
Note
Description
Set-up
NVM
Description
PILD Status
For DP transmitters possible statuses are:
•
both sides blocked
•
one side blocked.
•
Not Blocked
For AP/GP transmitters possible statuses are:
•
Blocked
•
Not blocked
PILD factor for prediction.
Possible values are 0.0 to 1.00 to the second decimal
places.
Current Work Mode
If PILD is enabled, modes are:
•
Training
•
Monitoring
If PILD is disabled,
no output.
ST 800 Series HART/DE Option User's Manual
Total number of power-ups
experienced by the unit.
None – initialized to zero prior to
leaving factory.
Backup once each 8 hour period
Only one power failure in each 8 hour
period is counted.
Displays time since last power-up in
minutes.
None.
Backup once each 8 hour period–
Revision 5.0