Changing The Virtual Amp (Amplifier) - Roland V-Combo VR-760 Owner's Manual

Changing the Virtual Amp (Amplifier)

fig.04-16(AmpKnobs)
Changing the Virtual Amp
Switches the frequency response and cabinet resonance of the virtual amp.
1.
Press the [AMPLIFIER] button to select the type of virtual
amp.
The amp type will change each time you press the [AMPLIFIER] button.
Type Explanation
TYPE 1 Characteristics of the most frequently used rotary speakers.
TYPE 2 Characteristics of the large vacuum tube amps that were an indis-
pensable element of the British hard rock of the 70's, and that con-
tinue to be favored by many hard rock guitarists.
TYPE 3 The character of a rotary speaker often used for rock organ.
TYPE4 This adds the characteristic rotary speaker sound used for a wide
range of tones, from a clean sound to heavy overdrive. What's
more, a new type of system is used that allows you to change the
amount of overdrive without causing the volume to change, mak-
ing level settings a breeze.
Adding distortion to the sound (Overdrive)
Overdrive is an effect which distorts the sound. By distorting the sound, you
can create the intense organ sounds that are frequently used in styles, such
as hard rock.
2.
Turn the [OVERDRIVE] knob to adjust the amount of
overdrive.
Rotate fully right: The distortion effect will be at maximum.
Rotate fully left: No effect.
Performing with the Keyboard
41