Port; Program Change Assign - Roland Edirol PCR-300 Owner's Manual

Settings (Edit mode)

Program change assign

Here's how to assign a program change message to a controller.
Edit
Basic editing
Advanced editing 1
Advanced editing 2
Advanced editing 3
Advanced editing 4
Basic editing (-> Advanced editing 1, 2 (p. 50), Advanced editing 3 and 4 (p. 51))
fig.H-Edit.eps
1
Press the [EDIT] button so it's lit.
fig.D-Edit.eps
The display will indicate "EDIT."
fig.D-r1.eps
2
Slightly move the controller to which you want to assign a program
change message.
If the controller is a button, press it.
The display will indicate the number of the controller you selected.
3
Check the indication in the display, then press the [ENTER] button.
48
Controller Display
[A1 (0)]
[A2 (1)]
[A3 (2)]
[A4 (3)]
[A5 (4)]
MIDI transmit
Bank MSB
channel
1–16 —
1–16 —
0–127
1–16
(00–7FH)
Current channel —
Current channel —
fig.D-PC.eps
4
Turn the VALUE knob to make "PC" appear.
5
Press the [ENTER] button.
fig.D-PCEdit0.eps
6
Turn the VALUE knob or press controller [A1 (0)] to select the basic
editing "PC0" indication.
fig.D-ChannelSelect.eps
7
Press the [ENTER] button.
The display will indicate "CH- -."
* The - - portion shows the currently specified value.
8
Enter the channel. Use the VALUE knob or controller [A1 (0)]–[B2 (9)] to specify
the desired channel.
Bank LSB Value range
0–127
—
(00–7FH)
You can specify an
—
upper and lower limit
0–127 0–127
(00–7FH) (00–7FH)
— PC DEC
— PC INC

Port

PORT 1
(fixed)
PORT 1
(fixed)
PORT 1,
PORT 2,
PORT 1+2
PORT 1
(fixed)
PORT 1
(fixed)