Roland Edirol PCR-300 Owner's Manual page 51

Advanced editing 3 and 4
Advanced editing 3 lets you assign the program change decrement function (PC
DEC) to a controller.
Advanced editing 4 lets you assign the program change increment function (PC INC)
to a controller.
1.
Press the [EDIT] button so it's lit.
2.
Slightly move the controller to which you want to assign PC DEC or PC
INC. If the controller is a button, press it.
The display will indicate the number of the controller you selected.
3.
Check the indication in the display, then press the [ENTER] button.
4.
Turn the VALUE knob to make "PC" appear.
5.
Press the [ENTER] button.
6.
Turn the VALUE knob or press controller [A4 (3)] or [A5 (4)] to get "PC3"
or "PC4" to appear in the display.
7.
Press the [ENTER] button.
Program change decrement function (PC DEC)
This lets you transmit a program change that is one less than the most recently
transmitted program change number.
Program change increment function (PC INC)
This lets you transmit a program change that is one greater than the most recently
transmitted program change number.
The PC DEC and PC INC are transmitted on the current channel (p. 33) in the same
way as the program change (p. 34). The display will show the value that is actually
transmitted.
* By "most recently transmitted program change number," we mean the value that was last
transmitted by the advanced editing 3 and 4 or program change functions (p. 34).
* Program changes transmitted by the basic editing or advanced editing 1 and 2 functions have
no effect on PC DEC or PC INC.
Settings (Edit mode)
51