Step 3: Make The Port Settings For The Software Rip - Roland Texart RT-640 Setup Manual

3.
Set the gateway address.

MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK

Press

Step 3: Make the Port Settings for the Software RIP

The settings for the software RIP will be made here. For the setup procedures, refer to the documentation of
the instructions for the software RIP.
Confirming that a network connection has been established
Roland VersaWorks
You can check whether the connection to the network has been complete by using the printing-test feature. For
the information on the method to conduct a printing test, refer to the documentation for the Roland VersaWorks
Other software RIP
Refer to the documentation for the software RIP of your own.
NETWORK
GATEWAY ADDR.
GATEWAY ADDR.
000.000.000.000
GATEWAY ADDR.
255.255.255.255
to go back to the original screen.
6. Network Settings
For the value to enter for your
gateway address, consult your
network administrator
：Select address number
：Move to the next address
39