Type Of Control Input Recording; Assigning A Phrase To A Port And Playing It Back (Direct Playback); What Is Direct Playback?/Uses And Applications; Connecting External Equipment - Roland AR-3000R Owner's Manual

Controlling the AR-3000R from an External Device

Type of Control Input Recording

There is one type of control input recording: Binary
Recording (p. 98).
Assigning a Phrase to a Port
and Playing It Back (Direct
Playback)
What Is Direct Playback?/Uses
and Applications
By inputting control signals directly to Port Nos. 1 through
16, you can play back the phrases assigned to the port
numbers. You can play back up to 16 phrases. You need to
assign the phrases you want to Port Nos. 1 through 16 ahead
of time.
This is handy when you want to directly specify the phrases
you want using switches, relays, sensors, and the like.
fig.14-02e
Port No. 1 2
Phrase
A0002 A0010 B0008 A0021

Connecting External Equipment

Ports Used for Direct Play
"1 through 16": Inputting a control signal directly to the port
having the number corresponding to the phrase starts
playback of the phrase.
"STOP": This stops phrase playback.
Set to "ON" by shorting the above-mentioned port and
"COM (common)."
fig.14-03e
Phrase playback
.....
.....
Phrase playback
Stop
Turning the Power On and Off → p. 24
86
Control signal
...
16
3 4 5
...
B0050 A0050
Common port
Operational Specifications for
Direct Playback
Basic Operation of Direct Playback
fig.14-04e
Port NO. 1
Port NO. 2
STOP Port
A0002
AUDIO OUTPUT
Playback:
Input a control signal to a port from 1 to 16.
→ This plays the phrase assigned to the port.
Stop:
Input a control signal to the Stop port.
→ This stops phrase playback.
Also, Direct playback includes normal playback, First-In
playback, Last-In playback, and sequence playback.
Choose the one that matches your usage conditions.
Also refer to "Operational Specifications of Control Input
Playback" (p. 85).
Normal Playback
Input made to a port having higher priority takes
precedence, and will result in earlier playback.
Port No. 1 has the highest priority, with the priority
decreasing as the port number increases.
Priority (High) Port No. 1 → 2 → 3 → ... → 16 (Low)
When a control signal is input to a high-priority port during
phrase playback, playback of the current phrase is stopped,
and playback of the specified phrase then begins.
fig.14-05e
Port NO. 1
Port NO. 2
A0002
AUDIO OUTPUT
No action results if a control signal is input to a low-priority
port (or the same numbered port) during phrase playback.
fig.14-06e
Port No.1
Port No.2
AUDIO OUTPUT
A0001
A0001 Interrupted
A0001
A0002 Interrupted
Disabled
A0001