Canceling An Assignment (No Assign) - Roland Edirol PCR-300 Owner's Manual

Canceling an assignment (NO ASSIGN)

Here's how to cancel the MIDI message assigned to a controller. If you've cancelled
the assignment, moving that controller will not transmit any MIDI message.
* If you cancel the MIDI message assignment for bender, modulation, aftertouch, hold (P1), or
expression (P2), these controllers will revert to controlling their original function. In such cases,
the current channel will be used as the MIDI transmit channel.
fig.H-Edit.eps
1
Press the [EDIT] button so it's lit.
fig.D-Edit.eps
The display will indicate "EDIT."
fig.D-r1.eps
2
Select the controller whose message assignment you want to
cancel, and move it slightly. If it's a button, press it.
The display will indicate the controller number.
3
Check the indication in the display, then press the [ENTER] button.
fig.D-NoAssign.eps
4
Turn the VALUE knob to get the "NOA" indication.
5
Press the [ENTER] button.
fig.D-yes.eps
6
"YES" will be blinking in the display; press the [ENTER] button
once again.
Settings (Edit mode)
67