Roland Edirol PCR-300 Owner's Manual page 69

Category Controller Display
[B1 (8)]
[B2 (9)]
MIDI
[A2 (1)]
+
[A1 (0)]
[A2 (1)]
+
[A2 (1)]
[A2 (1)]
Control map +
[A3 (2)]
[A2 (1)]
+
[A5 (4)]
Controller
[A2 (1)]
+
[A6 (5)]
[A2 (1)]
+
[A4 (3)]
Other
[A2 (1)]
+
[A7 (6)]
Item
Specifies whether the MIDI connectors will be used as a MIDI inter-
MIDI I/F SWITCH
face.
MIDI MERGE Specifies the port that will be merged when the "MIDI MERGE" switch
DESTINATION is On.
Switches the driver operation mode.
ADVANCED DRIVER
* If you change this setting, the change will take effect the next time
SWITCH
you turn on the power.
This setting is for future expanded functionality. It is not currently
USB UNIT NUMBER
used.
Specifies which control map will be loaded at startup when the PCR
STARTUP MEMORY
is powered up.
VALUE ENCODER Specifies the parameter that the VALUE knob will transmit.
DYNAMIC MAPPING/
Specifies the function of the DYNAMIC MAPPING/V-LINK switch.
V-LINK
Turn this on if you're using the PCR with certain applications (such as
H-ACTIVITY ON/OFF Pro Tools LE). If this is On, "90 00 7F" will be transmitted from "PCR
2" at intervals of approximately 500 ms.
FACTORY RESET Returns the PCR-300/500/800's settings to the factory-set condition.
Contents Factory setting
CONTROL MAP
System settings
Procedure
ON p. 76
PORT 1 p. 77
ON p. 78
0 —
p. 79
No. 0
KEY VELOCITY p. 80
DYNAMIC
p. 81
MAPPING 0
OFF p. 81
— p. 81
69