System Settings - Roland Edirol PCR-300 Owner's Manual

System settings

Here's how to make system settings for the PCR-300/500/800.
The system setting items are listed below.
Category Controller
[A1 (0)]
Clock [A2 (1)]
[A3 (2)]
[A4 (3)]
Keyboard [A5 (4)]
[A6 (5)]
[A7 (6)]
Pads
[A8 (7)]
68
Display Item
F8 CLOCK ON/OFF
F8 CLOCK DEFAULT
TEMPO
F8 CLOCK PORT SET
KEYBOARD VELOCITY
CURVE
KEYBOARD PORT SET
KEYBOARD
AFTERTOUCH CURVE
PAD VELOCITY CURVE
PAD AFTERTOUCH
CURVE
Contents
Specifies whether F8 Clock will be transmitted.
If "F8 Clock On/Off" is on, this specifies the default tempo of the F8
clock. After the power is turned on, this tempo will be output until you
move the VALUE encoder to which TEMPO is assigned.
Specifies the port from which F8 Clock is transmitted when "F8 Clock
On/Off" is on.
Specifies the response curve for the velocity that is transmitted when
you play the keyboard.
Specifies the port from which the keyboard and bender lever will
transmit performance data.
Specifies the response curve for keyboard aftertouch.
Specifies the response curve for the velocity that is transmitted when
you strike a pad controller [A1]–[A9] or [B1]–[B9].
Specifies the response curve for the aftertouch that is transmitted
when you press a pad controller [A1]–[A9] or [B1]–[B9].
Factory setting Procedure
OFF p. 70
120 p. 70
PORT 1 p. 71
1-MEDIUM p. 72
PORT 1 p. 74
1 p. 74
1 p. 75
1 p. 75