Toro Reelmaster 5510-D Operator's Manual page 7

Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions
on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on slopes can
cause the machine to become unstable.
1. Warning—read the Operator's Manual; do not operate this
machine unless you are trained.
2. Warning—wear hearing protection.
3. Thrown object hazard—keep bystanders a safe distance
away from the machine
Battery Symbols
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
(Affix over Part No. 133-2930)
decalbatterysymbols
6. Keep bystanders a safe
distance from the battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard
133-2931
4. Tipping hazard—do not drive across or down slopes greater
than 15 degrees; only drive on slopes with the cutting units
lowered; always wear a seatbelt
5. Warning—do not park on slopes; engage the parking brake,
shut off the engine, and remove the ignition key before leaving
the machine.
6. Warning—read the Operator's Manual; do not tow the
machine.
1. Danger—no riders.
7
93–6689
decal133-2931
decal93-6689