Jacking Points; Understanding The Diagnostic Light - Toro Reelmaster 5510-D Operator's Manual

Jacking Points

Note:
Use jack stands to support the machine when
required.
•
Front—rectangular pad, under the axle tube,
inside each front tire
Figure 71
1. Front jacking point
•
Rear—rectangular axle tube on the rear axle.
(Figure 71).
Understanding the
Diagnostic Light
The machine is equipped with a diagnostic light, which
indicates if the machine detects a malfunction. The
diagnostic light is located on the InfoCenter, above
the display screen
is functioning properly and the key switch is moved
to the O /R
N UN
briefly to indicate that the light is working properly.
When a machine advisory message appears, the light
illuminates when the message is present. When a
fault message appears, the light blinks until the fault
is resolved.
g031850
1. Diagnostic light
44
(Figure 72). When the machine
position, the diagnostic light turns on
Figure 72
g021272