Toro Reelmaster 5510-D Operator's Manual page 2

This product complies with all relevant European
directives. For details, please see the separate
product specific Declaration of Conformity (DOC)
sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects,
and other reproductive harm.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Introduction
This machine is a ride-on, reel-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed
for cutting grass on well-maintained lawns in golf
courses, parks, sports fields, and on commercial
grounds. It is not designed for cutting brush, mowing
grass and other growth alongside highways, or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Important:
To maximize safety, performance,
and proper operation of this machine, you must
carefully read and fully understand the contents
of this Operator's Manual. Failure to follow
these operating instructions or to receive proper
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
training may result in injury. For more information
on safe operating practices, including safety tips
and training materials, go to www.Toro.com.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. The model
and serial numbers are on a plate mounted on the
left side of the frame under the foot rest. Write the
numbers in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 1), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g000502