Toro Reelmaster 5510-D Operator's Manual page 21

Height of cut (HOC)
F Reel RPM
R Reel RPM
*Only operator-faced text is translated. Faults,
Service, and Diagnostics screens are service-faced.
Titles appear in the selected language, but menu
items are in English.
Protected under Protected Menus—accessible only
by entering PIN
About
Menu Item
Model
SN
Machine-Controller Revision
InfoCenter Revision
CAN Bus
Protected Menus
There are 8 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
auto idle time delay, Blade Count, Mow Speed, Height
of Cut (HOC), F Reel RPM, and R Reel RPM. These
settings can be locked by using the Protected Menu.
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
Controls the height of cut
(HOC) for determining the reel
speed.
Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted.
Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
the InfoCenter.
Lists the machine
communication bus status.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M
AIN
scroll down to the S
right button (Figure
2. In the S
ETTINGS
scroll down to the P
the right button
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 26B and
until the last digit is entered and press the right
button once more.
21
M , use the center button to
ENU
M and press the
ETTINGS ENU
25).
Figure 25
M , use the center button to
ENU
M and press
ROTECTED ENU
(Figure 26A).
Figure 26
Figure 26C). Repeat this step
g028523
g028522