Roland VG-99 Workshop Manual
V-guitar system using the built-in tuner
Hide thumbs
Also See for VG-99:
- Owner's manual (204 pages) ,
- Training manual (13 pages) ,
- Workshop manual (10 pages)
Related Manuals for Roland VG-99
Summary of Contents for Roland VG-99
- Page 1 Workshop ®ÂØÒňΠ® VG-99 V-Guitar System Using the Built-in Tuner © 2008 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S. VG99WS04...
-
Page 2: Using The Tuner
USB, the VG-99 is a guitarist’s dream machine, You can access the tuner from any of the VG-99’s screens. Each press of the capable of producing sounds that are limited only by your imagination. -
Page 3: Calibrating The Tuner
(if the right arrows light, the pitch is sharp; if the left arrows light, the pitch is flat.) The string is in tune when both large arrows light steadily and the Muting the VG-99’s output by turning on the tuner is useful for other pitch is highlighted. - Page 4 The Play screen is the VG-99’s “home” screen. It’s the screen that’s displayed after the VG-99 finishes its power-up sequence. You’ll The tuner is likely to be one of the features you use most on the VG-99. usually want to return to the Play screen when you’re done editing Besides accessing it with the front-panel TUNER button, you can also assign any VG-99 functions.
- Page 5 5 above to assign a different VG-99 function to the second footswitch (CTL 3 or CTL 4). You can use the FC-300 to turn the VG-99’s tuner on and off in a variety of ways, as we discuss next. The FC-300 must be in System Exclusive mode to display the VG-99’s patches and tuner, and also to use the “Quick Tuner”...
- Page 6 Quick Tuner FC-300 CTL and EXP Pedal Switches The Quick Tuner function allows you to toggle the VG-99’s tuner on and off You can assign TUNER ON/OFF to the FC-300’s onboard CTL pedals and/ from the FC-300 by pressing the number pedal for the currently selected or expression pedal switches.