Adjusting The Volume; Setting The Device (Amp) Connected To Main Out (Output Select) - Roland VG-99 Owner's Manual

Chapter 1 Outputting Sounds

Adjusting the Volume

Turn the OUTPUT LEVEL knob to set the volume to a suitable level.
fig.01-070
* The output from the SUB OUT connector (XLR type) remains
constant, regardless of the OUTPUT LEVEL knob setting.
* You can adjust the volume level by assigning this function to the
expression pedal or GK-3 GK volume control. For details, see
"Using the Switches, Pedals, and MIDI to Control the
Sounds (CONTROL ASSIGN)" (p. 82).
20
Setting the Device (Amp)
Connected to MAIN OUT (Output
Select)
Use this procedure to set the type of device connected to the MAIN
OUT jacks.
fig.01-071
3
3
1.
Press [GLOBAL].
The Global screen is displayed.
fig.01-072d
2.
Press PAGE [ ] to go to Page 1.
3.
Press [F4] (SELECT) or turn the F4 knob to set
the type of device to be connected to the MAIN
OUT jacks.
Value Explanation
Use this setting when connecting to Roland's
JC-120
JC-120 guitar amp.
Use this setting when connecting to a small
SMALL AMP
guitar amp.
Use this setting when connecting to the guitar in-
put of a combo amp other than the JC-120 guitar
amp (where the amp and speaker or speakers are
combined in a single unit).
COMBO AMP
* Depending on your guitar amp, you may be
able to obtain good results with the JC-120
setting.
Use this setting when connecting to the guitar
STACK AMP input of a stack-type guitar amp (where the
amp and speaker or speakers are separated).
Use this setting when connecting to the RE-
JC-120 Return
TURN of a JC-120.
Use this setting when connecting to the RE-
COMBO Return
TURN of a combo amp.
Use this setting when connecting to the RE-
TURN of a stack amp or the input of a rack
STACK Return mounted power amp.
Set to STACK Return also when using a guitar
power amp and speaker cabinet combination.
Use this setting when using headphones or
LINE/PHONES when connecting to a multi-track recorder for
recording.
4.
Press [EXIT] to return to the Play screen.
4
2
1