Setting The Down/S1, Up/S2 Switch Arrangement; Setting The Gap Between The Pickup And The Bridge (Pickup ´ Bridge) - Roland VG-99 Owner's Manual

Chapter 4 Global Device Settings (SYSTEM)
Setting the DOWN/S1, UP/S2
Switch Arrangement
On some guitars with the Divided pickup built in, the positions of
the DOWN/S1 and UP/S2 switches are reversed from those of the
Divided pickup. Set this so that the functions match.
1.
Follow Steps 1–3 in "Selecting the Settings"
(p. 42) to display the GK SETTING screen.
2.
Press PAGE [ ] [
3.
Use [F6] (SELECT) or the F6 knob to select the
arrangement.
Settings Explanation
NORMAL The switches will not be reversed.
The DOWN/S1 switch and UP/S2 switch will
REVRSE
be reversed.
44
] to display Page 2.
Setting the Gap Between the
Pickup and the Bridge (PICKUP
↔ BRIDGE)
Set the clearance from the center of the Divided pickup to the
bridge's saddle for each string.
* This setting is not required when piezo pickups are used.
1.
Follow Steps 1–3 in "Selecting the Settings"
(p. 42) to display the GK SETTING screen.
2.
Press PAGE [ ] [
3.
Rotate the F1–F6 knobs to set the clearance
for strings 1–6.
Settings
10.0–30.0 mm
string 6
String
Pickup
] to display Page 3.
Explanation
Specify the distance between the center
of the Divided pickup and the center of
each bridge saddle.
string 1
Bridge