Setting The Key; Mixing The Normal Pickup Sound; Setting The Volume Balance - Roland VG-99 Owner's Manual

Roland vg-99 v-guitar system owner's manual
Hide thumbs Also See for VG-99:
Table of Contents

Advertisement

Setting the Key

1.
Press [NAME/KEY/BPM].
2.
Press [F2] (KEY).
3.
Set the song's key with [F1] (SELECT) or the
F1 knob.
* The Alternate Tuning HARMONY and FX MOD 1/2
HARMONIST functions operate in accordance with the key set
here.
4.
If you want to save the edited settings,
perform the Write procedure (p. 38).
* If you do not want to save, press [EXIT] to return to the Play screen.
Chapter 2 Creating Sounds
Mixing the Normal Pickup
Sound
Creating Sounds Combining the Normal and GK Inputs.
It is possible to combine the sound of the COSM guitars and the
normal guitar pickups at the same time.

Setting the Volume Balance

1.
Press [COSM GUITAR].
2.
Set the COSM GTR SW to ON with [F1] or with
the F1 knob.
The sounds from the normal pickup and COSM guitar
are not played when COSM GTR SW is set to OFF.
3.
Press PAGE [
] several times to move to the
screen for setting the volume balance.
4.
Use the F1 and F2 knobs to set the balance
between the COSM guitar sound and the
normal pickup sound.
F1 Knob
Adjusts the COSM guitar's volume level. When POLY FX is
set to ON, it adjusts the volume level of the signal after it has
passed through POLY FX.
F2 Knob
This adjusts the volume of the normal pickup.
When the COSM guitar is connected in CHAIN at a point
other than the beginning of the effects chain, you can adjust
the volume of the sounds that have passed though effects
from the beginning of the chain up to the point where the
guitar is connected.
5.
If you want to save the edited settings,
perform the Write procedure (p. 38).
* If you do not want to save, press [EXIT] to return to the Play screen.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents