Pwm Depth; Pwm Rate - Roland VG-99 Owner's Manual

Chapter 9 Parameters Guide
PWM
Parameter/
Explanation
Range
FILTER CUTOFF
0–100 Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The sound
gets brighter (harder) as the value is raised.
FILTER RESO (Filter Resonance)
0–100 Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.
TOUCH SENS (Touch
0–100 This sets the sensitivity when the filter is
shifted according to the picking. The shift-
ing of the filter caused by the picking in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.

PWM DEPTH

0–100 This sets the depth to which the waveform's
pulse width is varied. Higher values result
in deeper undulations.

PWM RATE

0–100 This sets the speed at which the filter stops.
The speed increases as the value of the set-
ting is reduced.
SUSTAIN
0–100 Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
CRYSTL
Parameter/
Explanation
Range
ATTACK LENGTH
0–100 This sets the decay time for the attack por-
tion of the sound. A smaller setting results
in a shorter attack.
MOD TUNE (Modulation Tune)
0–100 This sets the tuning for the modulation ap-
plied to the attack.
MOD DEPTH (Modulation Depth)
0–100 This sets the depth of the modulation ap-
plied to the attack. Larger values result in
deeper undulations.
ATTACK LEVEL
0–100 This sets the volume level of the attack portion.
BODY LEVEL
0–100 This sets the volume level for the sustained
portion of the sound.
SUSTAIN
0–100 Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
114
Sensitivity)
ORGAN
Parameter/
Explanation
Range
FEET 16'
0–100 This is a Long Tone one octave lower than
the guitar.
FEET 8'
0–100 This is a Long Tone at the same pitch as the guitar.
FEET 4'
0–100 This is a Long Tone one octave higher than
the guitar.
SUSTAIN
0–100 Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
BRASS
Parameter/
Explanation
Range
FILTER CUTOFF
0–100 Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The
sound gets brighter (harder) as the value is
raised.
FILTER RESO (Filter Resonance)
0–100 Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.
TOUCH SENS (Touch
0–100 This sets the sensitivity when the filter is
shifted according to the picking. The shift-
ing of the filter caused by the picking in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.
SUSTAIN
0–100 Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
COSM GUITAR
Sensitivity)