Loading Performance Songs Into The Atelier - Roland Music ATELIER AT300 Owner's Manual

Saving performance data in SMF format (SMF) requires a
NOTE
longer time than saving it in ATELIER format (Original).
If the following screen appears
If you select a number at which a performance data has already
been saved, the following screen appears.
fig.E-64-b.eps
If you wish to update the contents of the
performance data
1.
Press the [Rec] button.
If you want to save your performance as new
data without overwriting the existing data
1.
Press the [Reset] button to stop the Save
operation.
2.
In the Song Select screen, select the number
that is displayed as "------------" (a number that
currently does not contain performance data).
3.
Save the performance data.
When saving is complete, the saved performance name
will be displayed.
What is the SMF Format?
SMF (Standard MIDI File) is a data format that was
created to provide music files compatibility between
manufacturers.
Record and Playback Your Performance
Loading Performance Songs
Into the ATELIER
To re-record a performance song that is stored on a USB
memory or floppy disk, you must first load that song into the
instrument.
2
4
1.
Prepare the performance song.
If you want to load performance song to a USB memory,
connect the USB memory to the External memory
connector. If you want to load performance song to a
floppy disk, connect the floppy disk drive to the external
memory connector. Into the floppy disk drive, insert a
floppy disk that was formatted by the ATELIER.
2.
Press the [Song] button (confirm that its
indicator is lit).
The Song Select screen appears.
3.
Press the [Media] button to select the media.
If you want to load a song from USB memory, choose
"Ext Memory." If you want to load a song from floppy
disk, choose "Disk."
3
5
97