Changing The Function Of The Foot Switch - Roland Music ATELIER AT300 Owner's Manual

Changing the Function of the Foot
Switch
You can select any of the following functions and assign them
to either Foot Switch on the right or left side of the Expression
Pedal.
1.
Press the [Utility] button.
2.
Press the Menu [
select "L Foot Switch" or "R Foot Switch."
ig.12-09
ig.12-09
3.
Press the Value [-] and [+] buttons to set the
function to be assigned to the foot switch.
To return to the basic screen, press the [Utility] button.
Setting
ROTARY FAST/ Switch the Rotary speed between
SLOW "FAST" and "SLOW."
While the Foot Switch is pressed, the
pitch will temporarily be lowered,
and will gradually return to normal
when you release the Foot Switch.
Glide effect is added to the voice of
GLIDE
all the sections being played on
Upper keyboard.
NOTE
The Leading Bass function (p. 49) will
LEADING BASS operate only while you continue
pressing the Foot Switch.
RHYTHM START/
Start/Stop the Rhythm.
STOP
The same function as the Composer
[Play/Stop] button. Each time you
COMP PLAY/STOP press the Foot Switch, the
performance data will play back or
stop.
] and [ ] buttons to
Descriptions
Glide is not applied to the
vintage organ.
Using the Performance Functions
Setting
INTRO/ENDING
Play an Intro or Ending.
Switches the Variation button. Each
VARIATION UP time you press the foot switch, the
Variation number will increment.
Switches the Variation button. Each
VARIATION DOWN
time you press the foot switch, the
Variation number will decrement.
Switches the Variation button. If the
Variation [1] button or [3] button is
selected, this will switch between the
VARIATION ALT Variation [1] and [3] buttons. If the
Variation [2] button or [4] button is
selected, this will switch between the
Variation [2] and [4] buttons.
FILL IN Adds a fill-in.
Stop the Rhythm for one measure
BREAK
(break).
Notes played on the Upper
keyboard will be sustained only
while you continue pressing the Foot
DAMPER OF UPPER
Switch.
NOTE
Notes played on the Lower keyboard
will be sustained only while you
continue pressing the Foot Switch.
DAMPER OF LOWER
NOTE
OFF
Turns the foot switch function off.
If the Utility menu "Registration Shift" setting is
"RIGHT", "LEFT" or "RIGHT+LoadNext", the Foot
NOTE
Switch will be dedicated to switching through the
Registrations, and the "R Foot Switch" or "L Foot
Switch" setting will be ignored.
Descriptions
Decay cannot be added to
the Solo voices.
Decay cannot be added to
the Solo voices.
69