Changing The Reverb Type - Roland Music ATELIER AT300 Owner's Manual

Adding Various Effects to a Voice

Changing the Reverb Type

By changing the reverberations of the notes, you can enjoy the atmosphere of
performance in a wide variety of different locations.
1.
Press the [Utility] button.
2.
Press the Menu [
3.
Press the [Rec] button.
4.
Press the Menu [
Type."
fig.11-04
5.
Press the Value [-] and [+] buttons to select a Reverb type.
Type
ROOM 1
ROOM 2
ROOM 3
HALL 1
HALL 2
SMALL CHURCH
LARGE CHURCH
CATHEDRAL
PLATE
DELAY
PAN DELAY
To return to the basic screen, press the [Utility] button.
78
] and [ ] buttons to select "Reverb."
] and [ ] buttons to select "Reverb
Descriptions
Reverberation of a small room
Reverberation of a small club
Reverberation of a large room
Reverberation of a large concert hall
Reverberation of a small concert hall
The reverberation of a small church
The reverberation of a large church
The reverberation of a cathedral
A bright, metallic Reverberation
An echo-like sound repeated several times
Similarly to the above but where the sound is
panned between the left and right speakers