Changing A Tempo Of Rhythm And Automatic Accompaniment; Playing A Countdown Sound When The Intro Ends; Beat Indicator ( → P - Roland Music ATELIER AT300 Owner's Manual

Changing a Tempo of Rhythm and Automatic Accompaniment

You can change the tempo of the Rhythm or Automatic Accompaniment.
fig.03-06(P.40)
1.
Press the Tempo [
tempo (speed) of the Rhythm or Automatic Accompaniment.
Tempo [
Tempo [
The value of the tempo currently set (20–500 beats per minute) can be
checked in the display.
You can also check the tempo by viewing the Beat indicator.

Playing a Countdown Sound When the Intro Ends

If an intro is played before your performance, you can have a countdown
played to the end of the intro, allowing you to understand easily where you
are to start playing.
1.
Press the [Utility] button.
2.
Using the Menu [
"Intro Count Down."
3.
Press the Value [-] and [+] buttons to switch the Intro Count
Down "ON" or "OFF."
4.
Press the [Intro/Ending] button.
5.
Press the [Start/Stop] button.
The intro plays, and a countdown plays to the end of the intro.
When the Synchro Start is on, specifying the chord on the Lower keyboard
starts the intro, and again, a countdown is given.
To return to the basic screen, press the [Utility] button.
] and [ ] buttons to change the
The tempo becomes slower
] button
The tempo becomes faster
] button
] and [ ] buttons, select
Using the Rhythm Performance
If you switch rhythms when
"Auto Std Tempo" (p. 108) is
on, the tempo changes to
match the rhythm. If you switch
rhythms when "Auto Std
Tempo" is off, the tempo
remains unchanged even when
you switch the rhythm.
By pressing the Tempo [
and [ ] buttons
simultaneously, the tempo is
returned to the standard (preset)
tempo for the selected Rhythm.
You can adjust the volume of
the Countdown Sound, refer to
"Adjusting the Metronome
Volume (Metronome Volume)"
(p. 111).
You can change the countdown
sound (p. 108).
]
45