Playing Back Performance Songs Stored On Usb Memory And Smf Music Files - Roland Music ATELIER AT300 Owner's Manual

Record and Playback Your Performance
Playing Back Performance
Songs Stored on USB Memory
and SMF Music Files
In addition to playing back the music you recorded on the
instrument and saved to a USB memory, ATELIER also lets you
enjoy a wide variety of commercially available song files,
such as defined below.
SMF Music Files
SMF (Standard MIDI File) is a data format that was
created in order to standardize music data formats
between manufacturers. Collections of songs in SMF
music data are commercially available in a wide range of
styles for enjoyment, as accompaniment for practicing
musical instruments, and for karaoke.
If you want to purchase SMF music data, you can contact
the dealer where you purchased the ATELIER.
4
2
5,6
90
To play back only one song
1.
2.
3.
4.
5.
6.
3
Playing back all performance data
1.
2.
3.
Prepare the song that you want to play back.
If you want to play a song from USB memory, connect it
to the external memory connector.
If you want to play a song from floppy disk, connect the
floppy disk drive to the external memory connector, and
insert a floppy disk into the drive.
Press the [Song] button (confirm that its
indicator is lit).
The Song Select screen appears.
Press the [Media] button to select the desired
media.
If you want to play a song from USB memory, choose
"Ext Memory." If you want to play a song from floppy
disk, choose "Disk."
Press the Value [-] and [+] button to select the
song that you wish to play back.
Press the [Play/Stop] button to start playback.
Playback of the performance data begins.
To stop playback, press the [Play/Stop]
button.
Prepare the song that you want to play back.
If you want to play a song from USB memory, connect it
to the external memory connector.
If you want to play a song from floppy disk, connect the
floppy disk drive to the external memory connector, and
insert a floppy disk into the drive.
While holding down the [Song] button, press
the [Play/Stop] button.
All performance data saved on the USB memory or
floppy disk will be played consecutively.
To stop playback, press the [Play/Stop]
button.