Loading Performance Songs Into The At-20S - Roland Music Atelier AT20s Owner's Manual

Record and Playback Your Performance

Loading Performance Songs Into the AT-20S

To edit (p. 83) or re-record a performance song that is stored on a floppy disk, you must
first load that song into the instrument.
fig.08-25
Rhythm
1.
Insert the floppy disk containing performance songs into the disk
drive.
2.
Press the Select [-] or [+] button to select the performance song you
wish to load.
3.
Press the [Load] button.
The selected performance data will be loaded into internal memory.
● If the following screen will appear
The following message below is shown when the performance song in the unit has not
been saved to floppy disk.
fig.08-10
❍ If you wish to erase the performance song
1.
Press the [Rec] button.
❍ If you wish to save the performance song on a floppy disk
1.
Press the [Reset] button to cancel the procedure.
2.
Save the song onto a floppy disk (p. 70).
72
2
Composer
Select
Demo
Accomp Bass
Play
Reset Stop
3
Load Function Save Registration
Rename Clear
Track
Lower Upper Solo
Rec Bwd
Control
Fwd