Changing the Drum/SFX Set
Immediately after the power is turned on, the STANDARD drum set will sound.
Let's try selecting a different Drum Set or the Sound Effect set.
As the drum set, you can choose from 13 types (AT-300) or 9 types (AT-100)
of drum set. When you change the drum set, the sound produced by each note
will change.
fig.02-19
1.
Press the [Drums/SFX] button (indicator lights).
2.
When the Drum Set name is displayed on the screen, press
the Value [-] [+] buttons to select a Drum Set or Sound Effect
Set.
The [Drums/SFX] button indicator will begin to blink.
fig.02-20
You can select from 13 (AT-300) or 9 (AT-100) different Drum Sets and one
set of Sound Effects as follows:
STANDARD, STANDARD 2, ROOM, ROOM2, POWER, ELECTRONIC,
TR-808, DANCE, JAZZ, BRUSH, BRUSH2, ORCHESTRA, SOUND EFFECTS
STANDARD, ROOM, POWER, ELECTRONIC, TR-808, JAZZ, BRUSH,
ORCHESTRA, SOUND EFFECTS
To stop mid-way through this or any procedure, press the [Display/Exit]
button.
3.
Press the [Drums/SFX] button once again.
The [Drums/SFX] button indicator will light constantly, and the selected Drum/
SFX set will be applied.
1, 3
2
1, 3 3
2
AT-300
AT-100
Selecting and Playing Sounds
NOTE
For some drum sets, there will
be keys that do not sound.
Refer to "Voice & Rhythm List"
(Appendix: separate booklet)
for details on which drum
sound or Sound Effect will be
played by each note.
You can also play the lower
manual to confirm the drum set.
39