Product Support; Comtech Ef Data Headquarters - Comtech EF Data CRS-280L Installation And Operation Manual

To ensure that the CRS-280L continues to comply with these standards,
observe the following instructions:
Connections to the transmit and receive IF ports ('N' type female connectors) should be made using
a good quality coaxial cable; for example, RG213/U.
The 'D' type connector attached to the rear panel must have a back-shell that provides continuous
metallic shielding. Cable with a continuous outer shield (either foil or braid, or both) must be used,
and the shield must be bonded to the back-shell.
The equipment must be operated with both AC module panels assembled firmly to the rear of the
chassis at all times. If it becomes necessary to remove either AC module, the user should ensure
that the cover is correctly re-fitted before normal operation commences.

Product Support

For all product support, please call:
+1.240.243.1880
+1.866.472.3963 (toll free USA)
By email:
techsupport@comtechefdata.com

Comtech EF Data Headquarters

http://www.comtechefdata.com
Comtech EF Data Corp.
2114 West 7th Street
Tempe, Arizona USA 85281
+1.480.333.2200
Preface
CRS-280/280L IF Switch for 1:N Redundancy
vi
Revision -
MN-PCB-4300A